By Autson Web Design

Schneider» دسته: ATV212








 The Altivar 212 is a variable speed drive for 3-phase
asynchronous motors from 0.75 kW to 75 kW. It is
specifically intended for the most commonly encountered
fluid management applications in tertiary sector buildings
(HVAC): heating, ventilation, air conditioning and pumping.
Due to its eco-energy based design, energy savings of
up to 70% can be achieved compared to a traditional
control system.


    Altivar 212 covers motor powers between 0.75 kW and 75 kW on the 
following supplies:

        200…240V 3-phase, from 0.75 kW to 30 kW, IP 21
        380…480V 3-phase, from 0.75 kW to 75 kW, IP 21
        380…480V 3-phase, from 0.75 kW to 75 kW, UL Type 12/IP 55

    Speed range: 1:50 
    Transient over torque: 110% - 60 s.

    Integrated EMC filters, categories C1 to C3 depending on model
    Communication bus most commonly used on the market integrated:
    Modbus, METASYS N2®, APOGEE FLN P1® and BACnet®.

    Optional: LonWorks 
    Complies to international standards and certifications: UL, CSA,
    C-Tick and NOM
    Antiharmonic technology enables a THDI < 30% to be achieved


    Less noise pollution (airdraulic noise, motor noise, etc.).
    Detection of transmission component breakage.
    Smoke extraction: forced start with fault inhibition.
    Automatic restart.
    Allows register management. 

Heating and Air conditioning:

    Optimise control in fluid processing.
    Use of PID controller (temperature, flow rate, pressure, etc.).
    Adjustable flow rates for better energy management.
    Suppression of mechanical resonance.


    Detection of underload/overload, pump running dry.
    Multi-motor configuration.
    Limitation of operating time at low speed.
    Sleep/Wake function.
    Pressure surge suppression for prolonging the life of the installation.




File Name

Catalogue ATV212 EN

ATV212 user manual EN





سه شنبه 1 اسفند 1396 Tuesday 20 February 2018 4 جمادی‌الثانی 1439